Pet & Flood

Benefits

• Innovative Chemistry – Innovative formulation which provides total urine decontamination encompassing stain, odour and bacteria removal.
• Stain Removal – Carefully selected blend of low pH salts to neutralize the urine crystals and remove the stain from the fibre.
• Decontamination – Contains a blend of biocides which have been carefully selected to provide total elimination of bacteria such as E-Coli found in urine deposits.
• Browning Removal – Provides high performance removal of cellulosic browning caused by flood, excessive wetting and high alkalinity.
• Dynamic Penetration Feature – The inclusion of super wetting and penetrating agents ensure that Pet & Flood quickly and effectively wets out the fibres, carpet backing and even the substrate below to ensure total elimination of all areas which have been contaminated.
• Fibre Safe – Safe for use on all natural and synthetic fibres, however fine fabrics must be pre-tested for colour stability before use.
• User Friendly – Pleasant fresh lemon scent, low odour formula – pleasant to use.

Application areas and surface suitability

Carpets and fabric stain removal

How to use

Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.

Dilutions

Ready to Use – No dilution necessary.

Application

1. Remove by steam extraction as much of the flood water or urine spill as possible, doing extra dry vacuum strokes.
2. Apply Pet & Flood undiluted for severe contamination or dilute up to 1:4 for lesser effected areas.
3. Spray apply this solution onto the fibre or fabric until it is wetted out.
4. Agitate solution using a carpet rake or upholstery cleaning brush.
5. Allow 10 – 20 minutes reaction time.
6. Rinse extract using Actichem Rinse Pro.
7. Allow to dry. Assist drying by increasing ventilation.

Note:
Some stubborn urine stains may require treatment using Peroxide (Spotaway U)