Polyprop Plus

Polypropylene carpet cleaning prespray

Product Description

PolyProp Plus takes the headache out of cleaning olefin (polypropylene) carpets. This smart double-strength formulation derives its unbelievable performance from smart soil release chemistry instead of harsh highly alkaline cleaning agents. It also provides excellent cleaning action on fire restoration work and filtration soiling. Use PolyProp Plus where you need to deliver consistent, reliable results.

  • Olefin (Polypropylene) Fibres – Advanced cleaning chemistry effortlessly releases oily and tracked – in soils from difficult-to-clean olefin fibres.
  • An Unbeatable Team – Team it up with Rinse Pro when rinsing. Rinse Pro encapsulates any remaining soils and provides an almost virtual guarantee against wicking and greying which is so typical to newly cleaned olefin carpeting.
  • Enhances – Overcomes dulling and greying problems typical to olefin carpets.
  • Pleasant – Low odour formula – pleasant to use.
  • Fire Restoration – Ideal for use on filtration soiling, air-condition diffuser cleaning and fire restoration.
  • Economical – The concentrated formula offers a “dollar-saving” 1:64 dilution ratio.
Application areas and surface suitability

Use to clean Olefin (Polyproylene) carpets.

SKU: AP986.20 / AP986.05
SKU: AP986.20 polyprop plus 20lt
SKU: AP986.05 Prespray detergent for polypropylene carpets

Additional Information

Colour: Deep Orange
pH: 10 -11
Fragrance: Fruity
Dilution: 1:32 to 1:64
Safety profile: Non-hazardous
Pack sizes: 5Lt & 20Lt

How to use

Always pretest in an inconspicuous location for fibre and dye sensitivity. Do not use on stain resistant carpets except in restoration situations.


Pump-up Sprayer

  • Add 15-30ml per litre of water (1:32 – 1:64) depending on soil conditions.

Hydroforce High Pressure Model

  • 1:9 tip (Yellow): Add 750ml – 1.4Lt into 5Lt Hydroforce container and fill with water.
  • 1:32 tip (Brown): Dilute 1:1 with water or add directly into 5Lt Hydroforce container.
  1. Always prepare the carpet to be cleaned with thorough vacuuming.
  2. Prespray the Polyprop Plus solution onto the carpet. Do not allow to dry.
  3. Agitate & allow 5-10 minutes dwell time.
  4. Extract rinse using Rinse Pro.
  5. Assist drying with air movers or similar if atmospheric conditions are humid.


Enquire Now

By using this website, you acknowledge that you have read and understand the Privacy Policy. It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.