Solv Strip
Floor stripper and coating remover
Solv Strip is a high-performance, solvent-based floor coatings stripper developed for the rapid removal of tough sealers, polish build-ups, and burnished finishes from resilient flooring such as terracotta, terrazzo, and concrete. It represents a major advancement in solvent-based stripping technology, delivering consistent, effective results.
Solv Strip offers a powerful solution for removing aged, discoloured coatings, quickly softening and emulsifying finishes to streamline the stripping process. It is not suitable for use on wood, vinyl, linoleum, or plastic flooring due to the risk of surface damage.
- pH
- Solvent
- Dilution
- Ready to use
- Fragrance
- Solvent
- Safety
- Class 3 Flammable
- Colour
- Clear
- Pack Size
- 5lt, 15lt
- Surfaces
- Natural Stone, Ceramic & Porcelain, Concrete & Masonry
- Product Code
- AP406
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Power-Packed: Provides strong stripping action on solvent-based coatings, burnish build-ups, and semi-permanent sealers.
- Fast Action: Starts to liquefy coatings immediately upon contact with the surface.
- Labour Saving: Requires minimal scrubbing, thus reducing time and labor.
- Free Rinsing: Exceptionally easy to rinse away slurry and residues.
Application areas and surface suitability
Solv Strip is safe for use on most resilient floors and quickly softens and emulsifies old worn and discoloured finishes for easy removal. Solv Strip is ideal for removing solvent sealers, base sealers and polish build-ups from natural stone, concrete and terrazzo. Do not use on wood, vinyl, linoleum and plastic flooring.
***Do not use on vinyl and linoleum floors***
How to use
Read and understand the Material Safely Data Sheet (MSDS) before use
Dilutions
Ready to use
Application
- Sweep area thoroughly to remove any soiling that could damage the floor if caught under scrubbing equipment
- Apply solution liberally to floor area with a cotton mop ensuring that the area is thoroughly wet. (Always work in small controllable area sizes)
- Allow at least 5 minutes dwell time and then agitate with low speed rotary scrubber or auto-scrubber fitted with a black, brown or high productivity pad.
- Be careful to ensure that the area does not “dry out” on the surface.
- After scrubbing, pick up slurry and rinse thoroughly with clean water to ensure that all stripper and sealer residues are removed.
- Allow floor to dry before with the restoration process and re-strip any areas that may still have polish build-up or that were missed in the first application.
