Fibre Shield

Benefits

• Advanced Protection – Modern flourochemical polymer technology provides premium protection against water based stains, oil based stains and general grime.
• Red Stain Protection – Specialty stain blockers provide added protection against acid dye stains caused by red cordial spills.
• Dry Soil Removal – Promotes effective dry soil removal, making vacuuming easy and effective.
• Makes Cleaning Easier – Makes routine carpet cleaning by wet extraction significantly more successful as the soiling is released quicker and easier.
• Low VOC – Water based low VOC Formula
• Wool Friendly – Exceeds the specifications for the safe protection of wool.

Application areas and surface suitability

Fibre Shield is a premium protector for carpets

How to use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Ensure that the carpet is clean and free of chemical residue. If wet extraction cleaning is to be done prior to the protection treatment, it is best to finish with an acid rinse. Leave the carpet as dry as possible
Can be applied to dry or damp fabric.

Dilutions

• Dilute 1:2 for clean damp carpets. Apply at a rate of 340 to 510ml per 5m2. (1 gallon per 400 to 600sq.ft)
• Dilute 1:4 for clean dry carpets. Apply at a rate of 575 to 850ml per 5m2. (1 gallon per 250 to 350sq.ft)
• See Actichem protector coverage charts.

Application

1. Spray Fibre Shield from 25 to 50cm away from the carpet using smooth back and forth motion overlapping slightly.
2. Start by applying one coat to high traffic areas. Then starting from one end of the room, treat all the carpeted area including the high traffic areas previously treated.
3. Brush with a soft brush to spread protector evenly.
4. Align fabric and speed dry.