Tile & Grout Cream

Benefits

• Safety First – Whilst Tile & Grout Cream has been formulated to deliver “startling cleaning performance”, the ingredients have also been carefully selected for their low hazard and non-toxic safety profiles.
• Speciality Penetration Feature – The chemistry featured in Tile & Grout Cream has the unique ability to penetrate through the soil or wax film and separate it from the substrate, enabling it to be flushed away.
• Protective Wax Coatings – Tile & Grout Cream is unique in its ability to dissolve and remove porcelain factory-applied wax coatings.
• Grout Haze – With the help of its micro abrasive content, Tile & Grout Cream effortlessly removes grout haze.

Application areas and surface suitability

Tile & Grout Cream is an incredibly versatile product and can be used on almost all hard surfaces. The most common applications for Tile & Grout Cream include:
Grout haze and wax removal from tiles and stone
Grease, oil and grime removal from natural stone, polished concrete and tiles.
Stainremoval from natural stone, concrete and tiles – Ideal for removal of sticky residues, paint spots, gum, food and drink stains and cosmetics.
Fine Stone Compatible – Safe for use on all marble, fine stone, porcelain and tile.
Provides outstanding removal of deep set grime and grease.

How to use

Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.

Dilutions

Ready to use

Application

Floor Surfaces:

1. Apply Tile & Grout Cream directly to the affected area.
2. Scrub thoroughly using a slow speed scrubber fitted with an applicable nylon pad or brush.
3. Allow 10 to 20 minutes dwell time for penetration, dissolving and lifting of oily soils or wax films.
4. Scrub and rinse well with clean water or detergent solution.

Vertical Surfaces:

1. This thickened nature of Tile & Grout Cream means it can be used for removing wax films, grout haze, oil, grease, paint, and graffiti off vertical surfaces.
2. Apply directly to the surface or onto a nylon (non-scratch) scouring pad.
3. Spread over the surface and agitate.
4. Allow 5 to 10 minutes dwell time.
5. Scrub / agitate and rinse well with clean water.