fbpx

Powerstrip

Floor stripper and coating remover

Product Description

SKU: AP404.15 / AP404.05

Powerstrip is a new generation floor coatings stripper that is guaranteed to work quickly and effectively saving you time and money. Powerstrip is possibly the most advanced floor coatings stripper on the market today. Powerstrip is designed to tackle tough solvent sealers and polish build-ups on resilient flooring such as terracotta, terrazzo and concrete. This truly is a remarkable achievement in coatings removal technology. Safer, more powerful stripping solutions mean peace of mind for everybody.

Colour: Orange/Tan
pH: 12
Fragrance: Mild
Dilution: 1:4 to 1:10
Safety profile: Non-hazardous
Pack sizes: 5Lt

SKU: AP404.15 powerstrip 15lt
SKU: AP404.05 Super-strength, low odour semi-permanent and solvent based coatings remover

Additional Information

Benefits
  • Power-packed – Serious stripping action on solvent based coatings, burnish build-ups and semi-permanent sealers.
  • Fresh Fragrance – Fresh citrus fragrance makes Powerstrip pleasant to use.
  • Fast action – begins to liquefy coating immediately on contact with the surface.
  • Labour saving – Minimal scrubbing is required ensuring that time and labour is minimized. Powerstrip is highly economical in use.
  • Versatile – Safe to use on a wide variety of surfaces
  • Low odour, Low Foam – Minimizes user discomfort.
  • Free rinsing – Exceptionally easy to rinse slurry and residues.
Application areas and surface suitability

Powerstrip is safe for use on most resilient floors and quickly softens and emulsifies old worn and discoloured finishes for easy removal. Powerstrip is ideal for removing solvent sealers, base sealers and polish build-ups from natural stone, concrete and terrazzo. Do not use on wood, vinyl, linoleum and plastic flooring.
***Do not use on vinyl and linoleum floors***

How to use

Read and understand the MSDS before use
Always pre-test in an inconspicuous location.

Dilutions
  • Dilute at 1:10 for removing light build-ups
  • Dilute at 1:4 for heavy build-up and UHS burnished coatings.
Application
  1. Sweep area thoroughly to remove any soiling that could damage the floor if caught under scrubbing equipment
  2. Apply solution liberally to floor area with a cotton mop ensuring that the area is thoroughly wet. (Always work in small controllable area sizes)
  3. Allow at least 5 minutes dwell time and then agitate with low speed rotary scrubber or auto-scrubber fitted with a black, brown or high productivity pad.
  4. Be careful to ensure that the area does not “dry out” on the surface.
  5. After scrubbing, pick up slurry and rinse thoroughly with clean water to ensure that all stripper and sealer residues are removed.
  6. Allow floor to dry before with the restoration process and re-strip any areas that may still have polish build-up or that were missed in the first application.

 

Enquire Now

By using this website, you acknowledge that you have read and understand the Privacy Policy. It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.