MethSan (B) Fog Boost
Advanced additive for fogging application of MethSan
MethSan (A) boosted with MethSan Fog Boost (B) is designed for decontaminating meth and illicit drug lab clean-up. MethSan Fog Boost is specifically designed to supercharge the chemical and biological removal properties of MethSan. Formulated to enable MethSan to be applied by ULV fogging, superwetting and carbon-chasing agents enable high-performance decontamination.
Part B provides hydrogen peroxide-boosting activity, additional wetting properties, and unique micro-carbon residue removal properties. Part B is available in two versions to facilitate both fogging and foam application.
- pH
- 10
- Dilution
- 1:4 (200ml/1Lt)
- Safety
- Warning
- Colour
- Blue
- Pack Size
- 5lt
- Product Code
- DR636
Interested in this Product? Get in touch with the Actichem team today…
Safety Data Sheet
Benefits
- Three potentiators dramatically raise the oxidising potential of Part A solution.
- The unique carbon residue chasing chemistry releases micro chemical particles for removal or/and neutralisation by oxidation.
- Specific safe solvents ensure effective formation of micro-droplets through wet/cold fogger application facilitating complete coverage and penetration into even micro-pores
- Corrosion inhibitors and pH balance protect equipment and surfaces against corrosion.
Application areas and surface suitability
MethSan Fog Boost (B) is designed for use with MethSan (A) & must not be mixed with any other product.
Read and understand the Material Safety Data Sheet (MSDS) before use.
How to use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals and dye stability. Only trained operators must use this product.
Dilutions
- Add 1 part MethSan Fog Boost to 4 parts MethSan (A)
- The MethSan (A) + MethSan Fog Boost (B) mixture must be used within 12 hours to achieve the full effect of the product.
Application
- Prepare property for decontamination as per approved protocols.
- Ensure correct PPE & respiratory equipment is used.
- Prewash the area with MethSan PreWash.
- Fill fogger container with MethSan (A) + MethSan Fog Boost (B) mixture.
- Fog treat the area with a generous amount of product. Ensure the area stays wet for 4 hours.
- Rewet with mixture if required.
- Agitate thoroughly with a brush or pad.
- Rinse with clear water.
