Grout Restore 60
Phosphoric acid cleaner for removing cement and grout residues, mineral scale build-ups and efflorescence.
Grout Restore 60 is a high-powered, phosphoric acid-based cleaner engineered for intensive restoration of hard surfaces. With 60% active phosphoric acid and added detergents, it cuts through stubborn cement residues, mineral scale, efflorescence, and deep-seated grime with precision and speed.
Its advanced formula combines acid strength with penetrating agents, making it ideal for challenging restoration tasks such as builders cleans, washrooms, pool surrounds, showers, and aged grout lines. Grout Restore 60 delivers rapid results where other cleaners fail—but should be kept clear of acid-sensitive surfaces and all ferrous or non-ferrous metals to avoid corrosion.
- pH
- 1 - 1.5
- Dilution
- 1:10 (90ml/1Lt)
- Fragrance
- None
- Safety
- Class 8 Corrosive
- Colour
- Green
- Pack Size
- 5lt, 15lt
- Surfaces
- Ceramic & Porcelain
- Product Code
- AP159
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Versatile Concentrate: Grout Restore 60 offers flexibility with its dilution ratios, allowing it to serve as a potent scale, scum, and grime remover or as an effective maintenance cleaner or neutralizer after strongly alkaline cleaning.
- Restoration Power: With a high concentration of phosphoric acid, it efficiently tackles grout smear, cement residues, rust, efflorescence, and extensive build-ups of scale and soap scum. The specialty penetrating agents ensure rapid and thorough cleaning.
- Grout Specialist: Designed specifically for overcoming stubborn grout stains and embedded soils. It is ideal for preparing grout prior to applying grout sealer.
- Cleaning Systems: Compatible with professional hard surface cleaning equipment for enhanced cleaning effectiveness.
Application areas and surface suitability
Grout Restore 60 is phosphoric acid based cleaner for hard surfaces.
Grout Restore 60 is ideally suited for use on masonry surfaces, flooring and walls. Safe for use on all man-made tiles. Use with care on sandstone, quarry tiles, terracotta, grout and slate. Not recommended for use on acid sensitive surfaces including engineered stone, terrazzo, marble, limestone, granite and other natural stone. Avoid contact with all ferrous and non-ferrous metals.
Grout Restore 60 can be used almost anywhere that there are dirty tiles or concrete. Especially suited to builders cleans, restoration applications, washrooms, showers and pools.
How to use
Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Grout Restore 60 is a corrosive acid and care should be taken to ensure that gloves and eye protection are worn.
Dilutions
- Mineral scale build-up, efflorescence, cement residues & heavy duty applications – 1:4 – 1:8 (200-110ml/Litre)
- Grout residues & light duty applications – 1:30 – 1:40 (30-20ml/Litre)
Application
Mineral scale build-up, efflorescence, cement residues and heavy duty applications.
- Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
- Scrub thoroughly with applicable nylon scouring/floor pad or brush
- Allow 10 to 30 minutes reaction time and re-agitate
- Extract/pick-up resultant slurry with extraction equipment
- Neutralize remaining residues by rinsing thoroughly with a 1:300 solution (30ml/10Lt) of T&G Cleaner Pro or Proneutro.
Grout residues & light duty applications.
- Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
- Scrub thoroughly with applicable nylon scouring/floor pad or brush
- Allow 10 to 30 minutes reaction time and re-agitate
- Rinse well with clean water.
