Encap Fine Fabric

Benefits

• Encapsulating – An advance blend of high performance embritteling and encapsulation agents encapsulate the emulsified soil, embritteling it for easy vacuum removal.
• Releases Upholstery Soiling – Encap Fine Fabric contains ingredients which specifically target body oils and fats, beverage and food stains and organic soils.
• Leaving Fabrics Chemical Free – Encap Fine Fabric residues left in the upholstery or rug fibres dry down to a light, brittle crystal which quickly breaks away from the fibre and is left chemical free.
• User Friendly – Low odour formula.
• Dye and Fabric Stability – The mildly acidic character of Encap Fine Fabric helps prevent cellulosic browning and stabilizes fibre dyes.
• No Resoiling – Unique embritteling and anti-resoiling polymer ensures that fabrics and fibres stay cleaner for longer.
• Fibre Safe – Safe for use on all water cleanable fibres including silk, cotton, linen, wool, stain-resistant nylon and all synthetic fibres.

Application areas and surface suitability

Delicate Area Rugs – Delicate area rugs which are water-cleanable can be cleaned using encapsulation cleaning or the wet cleaning method.
Delicate Cotton Fabrics – These are best cleaned used the Low Moisture (Dry) Cleaning Method.
Fine Fabrics – Upholstery which is water cleanable is best cleaned using the Wet Cleaning Method or the Encapsulation Method.

What is the difference between Encap Fine Fabric and a carpet encapsulating cleaner?
Encap Fine Fabric shares a number of similarities with a carpet encapsulating cleaner but with a few critical differences;

• Mildly acidic pH which stabilizes dyes and helps prevent browning.
• The cleaning ingredients chosen for Encap Fine Fabric, specifically target the oily, greasy soiling typical to upholstery.
• Specialty stain removal agents are included to assist with the removal of beverage, and tannin staining.

How to use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Note: If the fabric or rug is to be protected using a fluorochemical protector, the treated area must be extract/rinsed.

Dilutions

• Encapsulation Cleaning – Mix 250ml Encap Fine Fabric with 4 Litres clean water.
• Low moisture (dry cleaning) – Mix 250ml Encap Fine Fabric with 1 Litre clean water.
• Wet cleaning (delicate fabrics) – Mix 250ml Encap Fine Fabric with 4 Litres clean water.

Application

Encapsulation Cleaning

1. Vacuum fabric to remove all loose soil.
2. Mix 250ml Encap Fine Fabric with 4 Litres clean water.
3. Spray apply this solution onto the fabric until it is wetted out. (1Litre of ready to use solution should cover approximately a 4 seater lounge suit.)
4. Agitate solution using a bonnet mitt or an upholstery cleaning brush.
5. Remove excess moisture with a clean, white, dry terry towel.
6. Allow to dry. Assist drying by increasing ventilation.
7. Leave to dry for at least 24hours before dry vacuuming to remove dry, embrittled soil.

Low Moisture (Dry) Cleaning

1. Vacuum fabric to remove all loose soil.
2. Mix 250ml Encap Fine Fabric with 1 Litre clean water.
3. Whip-up solution to create a rich foam
4. Apply this foam onto the fabric using a sea sponge, bonnet mitt or upholstery cleaning brush. Agitate to remove maximum amount of soiling.
5. Remove excess foam and moisture with a clean, white, dry terry towel.
6. Allow to dry. Assist drying by increasing ventilation.
7. Leave to dry for at least 24hours before dry vacuuming to remove dry, embrittled soil.

Wet Cleaning Delicate Fabrics

1. Vacuum fabric or rug to remove all loose soil.
2. Mix 250ml Encap Fine Fabric with 4 Litres clean water.
3. Spray apply this solution onto the fabric until it is wetted out. (1Litre of ready to use solution should cover approximately a 4 seater lounge suit or 4m2)
4. Agitate solution using a bonnet mitt or an upholstery cleaning brush.
5. Rinse extract using Rinse Pro.
6. Allow to dry. Assist drying by increasing ventilation.