Colour enhancing sealer for stone and concrete
Intense is a colour enhancing sealer for stone and concrete.
Intense can only be applied by an Actichem approved applicator. To have this product applied, please contact an Actichem representative. Intense is only available direct from Actichem. For orders and technical assistance, get in touch via the enquiry form below, or call us on 1800 108 800
Actichem’s AP178 Intense is a premium quality sealer which enhances and enriches the natural colour and beauty of all stone types, whilst imparting outstanding stain protection. Intense beautifies and enriches the natural colouring found in stone by making the stone more light absorbent. The more light that is absorbed by the stone, the darker it will appear to the naked eye. This system also assists in maintaining consistent indoor temperatures reducing the need for heating and cooling systems.
Colour: Clear
pH: N/A
Fragrance: Solvent
Dilution: Ready to use
Safety profile: Class 3 Flammable liquid
Pack sizes: 5Lt & 15Lt
SKU: AP178.005 / AP178.15 / AP178.05
Intense is a colour enhancing sealer for natural stone and concrete.
Intense is well suited to all stone types. Substrates with larger open pores such as bluestone and sandstone respond exceptionally well to Intense. Substrates which are dense such as granite or polished marble are often more successfully treated with Intense Pro. Intense Pro is a modified version for easier and more effective application.
Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 32 degrees or if rain is expected within 24 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.
Expected Wear:
Intense will provide premium protection for up to 15 years and in many applications, several years longer. However application methods, weather conditions, traffic, harsh cleaning methods and substrate type will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
It is recommended that the sealer be re-applied every 5 – 7 years where harsh conditions exist.
Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Preparation:
Ready to use (do not dilute)