fbpx

Percide

Hospital grade disinfectant & mould removal

Product Description

Percide is a hospital grade disinfectant that is TGA listed. It is also an advanced mould removal product.

Actichem’s Percide is an advanced peroxide based disinfectant for the eradication of mould and decontamination of infectious environments.
Its unique formula penetrates deep into porous surfaces and reacts aggressively with mould spores & growth to entirely eradicate them. It also removes the mould stain and brightens the surface being treated. Percide does not encapsulate or hide mould, but eradicates its roots and spores to ensure consistent, 100% clearance reports on every mould remediation job.
Percide also displays impressive “hospital grade level” biocidal activity against bacteria and viruses including enveloped & unenveloped viruses and both gram negative & gram positive bacteria. Combined with it’s innovative surface wetting characteristics, this makes Percide an unbeatable choice for both mould remediation, bio-decontamination and infection control in demanding situations.

Application – Mould Remediation
Percide’s potentiated peroxide formula, has several innovative design features to provide consistent, reliable results in mould remediation every time. It’s aggressive reaction with mould can be seen by the rapid fizzing when it contacts mould and organic matter. This action also lifts embedded soiling allowing high performance mould reduction even on soiled and porous substrates.

Application – Cat 3 Water and Bio-hazard Decontamination
Percide’s primary function is to provide rapid, powerful pathogen eradication even in the presence of organic soil. Promoting this function is Percide’s deep pore penetration ability, making it the ideal decontamination and restoration tool for trauma, category 3 water and bio-contamination applications. Percide leaves no oily or toxic residue and can be left as residual after clean-up is complete. Percide is active against gram positive and negative bacteria, moulds, spores, enveloped and non-enveloped (lipid & non-lipid) viruses with high log reduction / kill rates

Colour: Clear (water white)
pH: 5.5 – 6.0
Fragrance: None
Dilution: Ready to use (or mixed 9:1 with booster)
Safety profile: Non-hazardous
Pack sizes: 750mL, 5Lt & 20Lt

SKU: AP610.0075 / AP610.05 / AP610.20
SKU: AP610.0075 Actichem Percide Applicator Bottle
SKU: AP610.05 Mould remover, destainer and micro-organism decontaminant
SKU: AP610.20 percide 20lt

Download Safety Data Sheet

Additional Information

Benefits
  • Disinfects bio-contaminated surfaces.
  • Kills mould and removes the staining.
  • Advanced Peroxide Formula – Percide comprises a unique peroxide formula for incredible disinfection and mould eradication performance in a low toxic, easy to use form.
  • Penetration – To provide ultimate sanitisation of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the biocide to penetrate faster and deeper into the inner-structure of fibre and porous substrates.
  • Cleaning and Destaining – Percide lifts mould from surface pores and provides incredible cleaning and destaining action on mould and bacterial discolouration.
  • Eliminates odours – Percide eliminates odours at their source by powerful antimicrobial action against odour causing germs.
  • Environmentally Safe – Percide is inherently biodegradable and is a great environmentally responsible choice. Safe for use in food environments.
Evaluation in accordance with BS.EN.1650

Percide evaluation table in accordance with BS.EN.1650_3

Evaluation in accordance with Hospital Grade Disinfectant Protocol

Percide evaluation table in accordance with Hospital Grade Disinfectant protocol_3

Directions for use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use. Percide is safe for use on many synthetic carpets and fabrics, however see notes regarding the use of Percide on carpet & fabric. It should also be noted that fibres destabilised by disaster activity could be affected

Mixing

No dilution necessary.
For enhanced mould build-up removal and biocidal action, mix 9 parts Percide and 1 part Percide Boost (Use within 8 hours).

Application
  1. Remove and clean away all wet and dry debris.
  2. Apply Percide solution to the affected area. Ensure all surfaces come into contact with Percide solution. Application can be by means of spray, wet fog, mop or cloth. See notes regarding wet fog application.
  3. Agitate briefly, where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.
  4. Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
  5. Rinse thoroughly with clean water.
  6. Repeating this process may be required for heavy mould conditions.

Note

  • For heavy mould situations mix Percide with Percide Boost for accelerated mould eradication and cleaning performance.
  • Agitate thoroughly, to achieve a perfect result.
  • After cleaning and disinfection is completed, Percide can be applied as a post residual treatment for enhanced inhibition of fresh mould growth.

For more information and information on mist spray and fogging download the the PDS.

 

Enquire Now

Download our Restoration Brochure! Gain the confidence to handle any restoration challenge effectively.

  • Discover our disaster restoration product range
  • Expert tips and tricks for mold, flood, and fire restoration
  • Access easy-to-read guides.

Download Restoration Handbook

Fill in your details to download our disaster restoration handbook.

Restoration Handbook Download

Fill in your details to receive a download link for the Restoration Handbook

Stone Handbook Download

Fill in your details to receive a download link for the Stone Handbook

Actichem Catalogue Download

Fill in your details to receive a download link for the catalogue. 

By using this website, you acknowledge that you have read and understand the Privacy Policy. It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.