Instaglaze
High solids floor polish
Instaglaze is a high-solids acrylic polymer floor polish designed for use with ultra-high-speed burnishing equipment. Its advanced formulation delivers a brilliant, deep-gloss finish that restores easily without the need for spray buffing.
Instaglaze provides durable protection in high-traffic areas by resisting scratches, black heel marks, and scuffs. It enhances slip resistance for improved safety, ensuring floors stay looking their best. For stone surfaces and polished concrete, a base coat of Instaseal is recommended to ensure optimal adhesion and finish.
- pH
- 7.5
- Dilution
- Ready to use
- Fragrance
- None
- Safety
- Warning
- Colour
- White
- Pack Size
- 5lt, 15lt
- Surfaces
- Natural Stone, Concrete & Masonry
- Product Code
- AP425,05, AP425
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Brilliant Wet-Look Gloss: Produces an unmatched, deep-gloss finish that is durable and highly scratch-resistant when properly buffed or burnished.
- Excellent Repair-ability: Easily restored to a deep shine through cleaning and buffing with electric machines, responding well to maintenance programs.
- Coating Performance: Offers optimal durability and resistance to traffic marks, black heel marks, and scuffing.
- Slip Resistance: Provides exceptional slip resistance, ensuring safety in high-traffic areas.
Application areas and surface suitability
Instaglaze is high solids acrylic polymer floor polish.
Ideal for use on vinyl, slate, terrazzo, terracotta marble and granite. On stone surfaces and on polished concrete it is recommended that a base coat of Instaseal be applied first. Instaglaze is ideally suited to floors in commercial and retail environments.
Considerations:
Slip resistance: Instaglaze provides conformance with AS/NZS 4586:2004 slip resistance classification of new pedestrian surface materials (wet and dry).
How to use
Read and understand the MSDS before use
Always pre-test in an inconspicuous location.
Preparation:
Strip off old polish and wax residues using floor coatings remover. Ensure that the floor is thoroughly rinsed with clean water and is totally dry.
Dilutions
Ready to use
Application
Apply 3 to 5 coats of Instaglaze depending on the porosity of the surface and the expected amount of traffic. Repeated thin, evenly spread coats are better that one heavy application.
If Instaseal has been applied as a base coat, only 2 to 3 coats of Instaglaze need to be applied. Instagloss can be applied as soon as the Instaseal is touch dry.
Coverage is 50-80m2 per litre per coat depending on the porosity of the surface.
Directions:
- Apply Instaglaze using a clean polish applicator. Spread a thin coat over the floor area using slightly overlapping strokes.
- Allow to dry (30-40 minutes).
- Apply the second and subsequent coats in the same manner as the first. Apply each coat at right angles to the previous coat to ensure even coverage.
- Allow at least 12 hours before returning the floor to normal use.
Maintenance:
Maintain the Instaglaze floor finish using ProNeutro neutral cleaner. Buff regularly using Instabuff or Instabuff Super and a white, grey or red pad. Use an electric or battery powered polishing machine capable of between 150 and 1000rpm.
See article on how to apply polish.
