Actichem POG
Paint, oil & grease stain remover
Actichem POG is a citrus-based solvent stain remover featuring a powerful blend of polar and non-polar solvents designed to tackle stubborn oily soils, grease, and paints. It is also formulated to boost the cleaning power of pre-spray solutions for heavily soiled carpets.
Widely favored by cleaning professionals, Actichem POG stands out as a versatile spot and stain remover effective on both carpets and upholstery, as well as hard surfaces. For instance, when combined with Actisorb, it delivers excellent results by drawing oils out of natural stone and concrete.
- pH
- Solvent
- Dilution
- Ready to use
- Fragrance
- Solvent
- Safety
- Danger
- Colour
- Clear (water white)
- Pack Size
- 5lt, 500ml
- Surfaces
- Carpet, Natural Stone, Upholstery, Concrete & Masonry
- Product Code
- AP482
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Powerful – A high-performance water rinseable blend of solvents, wetting agents and emulsifiers.
- Oil Stains – removes tough oily stains, paints, cosmetics, grease, oily spots, adhesives and most inks.
- Low VOC- Non-flammable, low VOC’s. Easy and safe to use.
- Booster – perfect for use as a booster when added to pre-spray solutions.
Application areas and surface suitability
Actichem POG is ideal to use on all carpet fibres, fabrics and hard surfaces. However some surfaces are solvent sensitive including some carpet backings, some plastics and polymer coatings.
How to Use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Do not use on solvent sensitive surfaces including bitumen backed carpeting.
Dilution
Stain removal – Ready to use
Booster Additive Use
Add 10-30ml of Actichem POG per litre of ready to use pre-spray solution
Add 100-200ml of Actichem POG per litre of Hydroforce concentrate (1:9 tip)
Application
- Sponge or scrape up any surface spot material.
- Apply Actichem POG to a clean white absorbent cloth and apply to spot.
- Actichem POG can also be applied to severe stains using a trigger spray bottle.
- Blot or tamp to remove spot. Do not rub. Deep spots may need light brushing. Work from outside to centre of large spots.
- Repeat if necessary.
- Extract with warm water or an emulsifier solution.
- Brush fabric to align fibres.
Booster Additive Use
Add 10-30ml of Actichem POG per litre of ready to use pre-spray solution
Add 100-200ml of Actichem POG per litre of Hydroforce concentrate (1:9 tip)
