How to remove Powerade from carpet

January 8th, 2025 | Carpet

All How To How to remove Powerade from carpet

Removing Powerade stains from carpets and upholstery can be particularly challenging due to the intense food dyes it contains.

These artificial dyes create the drink’s vibrant, neon hues but also have a tendency to penetrate deeply into carpet fibers and upholstery fabric. Once absorbed, the dye molecules bind tightly to the material, making the stain highly visible and difficult to lift.

The longer the stain sits, the more likely it is to set permanently, so prompt action is crucial to preserve the appearance of the carpet or upholstery.

Equipment

To remove powerade from carpet, you will need:

Absorbent white terry towel
Carpet Spotting Brush
Actichem CTR
Carpet Extraction Machine.
PPE including eye protection and gloves.

Ensure that you have read and understood the safety data sheet and technical information for all chemical products used. This includes a thorough understanding of directions for use and the limitations and capabilities of each product.

The Process

Before

1. Apply Conquer O2

2. Agitate

3. Dwell for 10 mins

4. Extract

After

Apply Actichem CTR
Begin by generously applying Actichem CTR directly to the stained area. This high-performance stain remover is specially designed to break down and neutralise synthetic dye stains like those found in Powerade. Ensure even coverage, saturating the fibers to tackle the stain effectively.
Agitate the Area
Using a spotting brush, gently agitate the treated area by tamping (pressing and lifting the brush, rather than scrubbing). This helps to work the solution deeper into the carpet fibers or upholstery fabric, ensuring thorough contact with the dyes. Avoid excessive scrubbing to prevent spreading the stain or damaging delicate fibers.
Allow for Dwell Time
Let the Actichem CTR sit on the stain for approximately 10 minutes. This dwell time allows the active
compounds to penetrate the fibers and loosen the dye molecules, making them easier to remove during extraction.
Extract & Rinse
Using wet extraction equipment, thoroughly rinse and extract the treated area. This step removes both the stain and the cleaning solution, ensuring no residue remains.
Treat Remaining Stains with Conquer O2
If any traces of the stain remain, repeat the process using Conquer O2, a powerful oxygenated stain
remover. Apply Conquer O2 to the affected area, agitate gently, and allow it to dwell for 5–10 minutes. Then, rinse and extract again to remove the solution and stain residue.
Address Stain Shadows
If a faint stain shadow persists after the second treatment, reapply Conquer O2 to the affected area.
Instead of extracting, gently blot the spot with a clean white cloth to remove excess moisture. Leave the area to air dry, allowing the oxygenated formula to continue breaking down the stain as it dries.

Further notes

Alternative Step 1: Using Conquer O2 First
In cases where dye stains are particularly vibrant or difficult, Conquer O2 can be used in Step 1 instead of Actichem CTR. Conquer O2’s oxygenated cleaning power works effectively to loosen and lift synthetic dyes like those found in Powerade. Follow the same procedure: apply the solution, agitate, allow dwell time, and extract. Actichem CTR can then be used in Step 5 for any remaining stains.
Using a Hot Oxyboost Solution for Synthetic Fibers
For synthetic carpets or upholstery, a hot Oxyboost solution can provide an extra boost of cleaning power. To prepare:
1. Mix 15g of Oxyboost into 1 liter of hot tap water.
2. Add 10–30ml of your chosen prespray solution and stir thoroughly.
3. Apply the mixture to the stained area immediately to prevent the solution from cooling.
4. Allow it to dwell for 10 minutes, giving the solution time to break down the stain.
5. Finish by thoroughly extracting and rinsing with wet extraction equipment.
This method is ideal for synthetic fibers, as the heat enhances the stain removal process without risking damage to the material.
Tackling Stubborn Stains with Actichem Red Fix
For particularly tough stains that resist initial treatments, Actichem Red Fix is highly recommended. This advanced stain remover is formulated specifically for persistent dyebased stains, ensuring even the most challenging Powerade marks are addressed. Use Red Fix as a follow-up treatment if other methods fail, applying it carefully and following the manufacturer’s instructions.
Gentle Cleaning for Delicate Fibers and Fabrics
When treating delicate fibers or fabrics such as silk, wool, or fine upholstery, avoid spraying cleaning solutions directly onto the surface. Instead, dampen a clean white absorbent towel with the chosen spotting solution and blot the stain gently.
This method prevents overwetting and minimises the risk of damage or discoloration while still delivering effective cleaning results. Always test in an inconspicuous area first to ensure compatibility with the fabric.

Where To Buy

Actichem CTR – Find a stockist

Actichem CTR is a coffee and tannin stain remover for carpet & fabric cleaning.

Actichem CTR is a high activity formula for neutralising and removing coffee and tannin stains. This professionally researched formula includes a special blend of low pH compounds proven to remove tough tannin staining, coffee marks, cellulosic browning discolourations, water marks, and many dye and beverage stains.

Additional Resources

Download Blog

Carpet Handbook

Actichem Brochure

Share this product

Email Facebook Linkedin twitter

Manufacturing & Head Office
11 Gamma Close
Beresfield NSW 2322
Newcastle, Australia

(02) 4966 5516
[email protected]

Subscribe to updates

All

Commercial Cleaning

Stone & Tile Care

Connect

Certifications

This website requires Javascript. Please enable javascript in your browser.

It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.

Commercial Cleaning

Stone & Tile Care

How to remove Powerade from carpet

Equipment