November 30th, 2018 | Charts & Guides
How to dilute & use floor strippers
A 5Lt of AP400 Instastrip will make up 20Lt of RTU solution (1:4 dilution) which will be able to strip approximately 300m2 (1Lt per 15m2) on a vinyl floor. If this is on tiles the rate would drop to 200m2 (1Lt per 10m2).
For AP404 Powerstrip, a 5Lt will make up 20Lt of RTU solution (1:4 dilution) which will be able to strip approximately 200m2 (1Lt per 10m2) of tiled (eg terrazzo) floor. If the floor is porous or textured the rate would drop to 150m2 (1Lt per 7.5m2).
The Powerstrip can also be used at up to 1:9 dilution (5Lt makes 50Lt) if the sealer being stripped is a water-based polymer.
Remember that Powerstrip must not be used on vinyl.
Dilution: 1:4
5lt makes up: 20lt RTU Solution
Strip Area: 300m2
m2 per 1lt: 15m2
Dilution: 1:4
5lt makes up: 20lt RTU Solution
Strip Area: 200m2
m2 per 1lt: 10m2
Dilution: 1:4
5lt makes up: 20lt RTU Solution
Strip Area: 200m2
m2 per 1lt: 10m2
Dilution: 1:4
5lt makes up: 20lt RTU Solution
Strip Area: 150m2
m2 per 1lt: 7.5m2
Dilution: 1:9
5lt makes up: 50lt RTU
Strip Area: 200m2
m2 per 1lt: 10m2
Download this info as a handy PDF here: S&T_Floor Stripper Usage Rates
Oil stains are an unsightly addition to any porous surface. Download PDF article here Whether it be concrete, natural stone [...]
Read moreAll your questions regarding efflorescence answered in one handy article. Let’s start with the word itself. How do we [...]
Read moreSandstone is an iconic feature of Australian landscape design and construction. Sandstone has been used as a construction material in [...]
Read moreEverything that you need to know about treating urine stains on carpets and fabrics all comprehensively covered in one awesome [...]
Read more