Odourtak W – Citrus

Benefits

• Molecular Odour Elimination: Pairs with odour molecules on a molecular level to permanently neutralise smoke and soot odours without masking.
• Thermal Fogging Optimised: Designed for use in thermal foggers, producing fine droplets that replicate smoke particle pathways for deep penetration.
• Advanced Chemistry: Utilises high-purity glycols and solvents to ensure extended suspension and maximum contact with odour-impacted surfaces.
• Wide Smoke Application: Effectively targets odours from timber, paper, protein, and synthetic fires.
• Fresh Citrus Scent: Leaves behind a clean, citrus fragrance to refresh treated spaces and reset olfactory senses.
• Ideal for Inhabited Spaces: Safe and effective for use in occupied areas such as homes, offices, and common rooms during or post-restoration.

Application areas and surface suitability

Odourtak W (water) is formulated to be applied through thermal fogging equipment primarily for treating strong, stubborn odours caused by smoke and soot. This process can be used for initial knock-down on job entry and once fire remediation wash down has been completed.
The heated thermal fogging process creates micro-droplets to mimic the passage of micro-smoke particles as they have deposited in the tiny pores of affected surfaces, providing extremely effective results.

Odourtak W – Ideal for inhabited spaces such as rooms, offices, halls etc.

How to use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.

Suitable protective clothing must be worn.
A respiratory protection device must be worn as described below:

• Gas filter – Filter type Type A Class 1 or 2 protecting against organic and inorganic vapours (solvents with boiling points above 65°C).
  Must meet AS/NZS standard(AS1715/1716). Cartridge Colour is Brown.
• Combine filter – filter type CF22 A2 protecting against organic and inorganic gases, solid & liquid particles and micro-organisms.

Dilutions

Odourtak is supplied ready-to-use. Do not dilute or mix with other chemicals.
Use 0.5ml – 1.5ml per m3 air/room space.
When using Odourtak W ensure the fogging equipment is compatible with water based products.

Application

OPTIONAL – thermal fog as an initial knock-down solution on entry of the job.
Remediate the area using professional restoration techniques.

Prepare for fogging by:

• Determining the volume of the room to establish how much Odourtak will be required to treat the area.
• Covering or removing all food, food equipment and all items which may be negatively affected by water-based solvents (Odourtak W)

1. Apply Odourtak using thermal fogging equipment at a rate of 0.5ml – 1.5ml per m3 air/room space.
2. Keep the treated area closed for a minimum of 30 minutes. Ventilate for 1 hour before allowing re-occupation.