Mould Exterminator
Mould, mildew and mould stain remover
Mould Exterminator is a ready-to-use, advanced mould remediation solution formulated to rapidly kill and remove mould, fungi, and associated staining. Its powerful stain removal can be seen almost instantly when applied to mould-affected surfaces. Mould Exterminator's potentiated chlorine technology penetrates deep into the affected surface completely destroying the mould hyphae and root system, making it ideal for sub-floors, external walls, roofs, and uninhabited structures. This ensures a 100% clearance report on every mould remediation job.
- pH
- 11.5
- Dilution
- Ready to use
- Fragrance
- Lemon
- Safety
- Danger
- Colour
- Light Yellow
- Pack Size
- 5lt, 20lt, 750ml
- Surfaces
- Natural Stone, Ceramic & Porcelain, Concrete & Masonry, Timber
- Product Code
- AP726
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Disinfects bio-contaminated surfaces.
- Kills mould (including roots and hyphae) and removes the staining.
- Penetration: To provide complete mould removal of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner-structure of fibre and porous substrates.
- Cleaning: Mould Exterminator also provide outstanding cleaning power to remove the accompanying organic grime.
- Almost instant stain removal with no scrubbing.
Application areas and surface suitability
Ideal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways.
How to Use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Special use notes:
- Do not use or allow contact on carpets, fabrics or sensitive surfaces.
- After cleaning and disinfection is completed, Actichem Biosan II can be applied as a post residual treatment for enhanced inhibition of fresh mould growth.
- Further information can be found in the Actichem Mould Dream Team booklet.
- Masonry and stone surfaces can be sealed with an Actichem penetrating sealer to prevent future mould growth.
Dilution
Do not dilute. Ready to use
Application
- Ready to use. No mixing required.
- Remove and clean away all wet and dry debris.
- Apply Mould Exterminator to the affected area. Ensure all surfaces come into contact with the Mould Exterminator. Application can be by means of spray, mop or cloth.
- Agitate areas with organic or mould build-up to promote complete removal of the bio-mass. Agitation will also aid mould and stain removal.
- Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
- Rinse thoroughly with clean water, where possible.
- Repeating this process may be required for areas with heavy organic loading.
Specifications
Colour: Light yellow
pH: 11.2 – 11.8
Fragrance: Lemon
Dilution: Ready to use
Safety: Non-hazardous
Pack Size: 750ml & 5Lt
