Hypo Enforcer
Booster and activator for use with Sodium Hypochlorite (pool chlorine)
Hypo Enforcer is a high-performance additive for chlorine, designed to unlock the full potential of Sodium Hypochlorite for mould remediation. By enhancing chlorine activity and boosting wetting power, it ensures deep penetration and effective mould eradication—even in porous and challenging substrates. This ensures a 100% clearance report on every mould remediation job. On its own, Sodium Hypochlorite will only actually release a small percentage of its real power when applied to a mould affected surface. This is due to its in-built stabilisation mechanism as well as its poor wetting ability. When you add Hypo Enforcer, Sodium Hypochlorite comes alive. You will immediately extract every single atom of power out of the Chlorine molecule, and drive that power right down deep into the roots and hyphae of the mould and thoroughly destroy it. This combiation's powerful stain removal can be seen almost instantly when applied to mould affected surfaces.
- pH
- 11.5
- Dilution
- 1Lt Hypo Enforcer to 15Lt Pool Chlorine
- Fragrance
- Lemon
- Safety
- Danger
- Colour
- Light Yellow
- Pack Size
- 5lt, 1lt
- Surfaces
- Natural Stone, Ceramic & Porcelain, Concrete & Masonry
- Product Code
- AP728
Interested in this Product? Get in touch with the Actichem team today…
Benefits
- Enhanced Chlorine Power: Maximises sodium hypochlorite performance for reliable mould removal.
- Super-Wetting Formula: Improves surface contact and solution penetration into fibres and porous materials.
- Deep Penetration: Reaches into the roots and hyphae of mould colonies for thorough decontamination.
- Powerful Stain Removal: Rapidly lifts dark mould staining from treated surfaces.
- Disinfection: Kills microorganisms present on bio-contaminated surfaces for added hygiene.
- Cleaning & Destaining: Combines strong cleaning action with visible stain elimination.
Application areas and surface suitability
Ideal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways.
How to Use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Special use notes:
- Do not use or allow contact on carpets, fabrics or sensitive surfaces.
- After cleaning and disinfection is completed, Actichem Biosan II can be applied as a post residual treatment for enhanced inhibition of fresh mould growth.
- Further information can be found in the Actichem Mould Dream Team booklet.
- Masonry and stone surfaces can be sealed with an Actichem penetrating sealer to prevent future mould growth.
Dilution
Add 1Lt of Enforcer to 15Lt of 12.5% Sodium Hypochlorite (Pool Chlorine). Mix well.
Application
- Remove and clean away all wet and dry debris.
- Apply Hypo Enforcer – Chlorine solution to the affected area. Ensure all surfaces come into contact with the solution. Application can be by means of spray, mop or cloth.
- Agitate areas with organic or mould build-up to promote complete removal of the bio-mass. Agitation will also aid mould and stain removal.
- Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
- Rinse thoroughly with clean water, where possible.
- Repeating this process may be required for areas with heavy organic loading.
Specifications
Colour: Light yellow
pH: 11.2 – 11.8
Fragrance: Lemon
Dilution: 1:15
Safety: Non-hazardous
Pack Size: 1Lt
