A facility manager’s ultimate guide for effective stain removal.
A comprehensive understanding of how to effectively remove stains from carpets is crucial for professionals looking to enhance productivity while addressing cleaning challenges. In this article, we’ll share effective techniques for tackling stains less than seven days old, stubborn old marks, and large spills. By mastering these methods, you can ensure carpets are restored to their pristine condition, allowing your team to work more efficiently and effectively. Let’s dive in and boost your cleaning performance!
Fresh Stains on Carpet
All stains under 7 days old (except chewing gum, bitumen, blue tack)
Products
Conquer is an exceptional stain remover for carpets and upholstery, effective on a wide range of water-based and oily stains. It features anti-resoiling encapsulation technology and focuses on fibre care. Utilising the latest polymer and surfactant technology, Conquer consistently delivers impressive results.
Equipment
To remove fresh stains from carpet & upholstery, you will need:
• Carpet spotting brush.
• White terry towel.
The Process
-
Apply Solution
Spray the Actichem Conquer to the stain, making sure the fibres are completely wetted out.
-
Agitate Stain
Agitate the stain by tamping up and down with a spotting brush to maximise penetration.
-
Blot
Blotting with a white terry towel will improve results.
-
Allow to dry
No rinse is required. Allow to dry for 24-48hours. Maintenance dry vacuuming will remove the dry chemical and stain residues.
Further Notes
-
User Safety
Actichem Conquer is a very safe product to use, however it is always advised to wear gloves when spot cleaning. Avoid contact with eyes.
-
Fibre Safety
Actichem Conquer is safe for use on all fibres and fabrics. However, delicate fibres can be discoloured by being overwet, so take care. Furthermore it is advised to pretest when spotting delicate fibres to check for chemical sensitivity and colour fastness.
Old & Stubborn Stains On Carpet
Old stains and gums may require additional treatment.
Coffee, wine, cola, beverages, food
Chewing gum, bitumen, blue tack, paint
Used here to rinse out residues
Equipment
To remove old and stubborn stains from carpet & upholstery, you will need:
• Carpet spotting brush.
• White terry towel.
The Process (Coffee, wine, cola, beverages, food)
-
Apply Solution
Spray the Actichem Conquer O2 to the stain, making sure the fibers are completely wetted out.
-
Agitate Stain
Agitate the stain by tamping up and down with a spotting brush to maximise penetration.
-
Extract or Blot
Blotting with a white terry towel will improve results. Some severe stains might require flushing with the spotting machine.
-
Allow to dry
No rinse is required. Allow to dry for 24-48hours. Maintenance dry vacuuming will remove the dry chemical and stain residues.
The Process (Chewing gum, bitumen, blue tack, paint)
-
Apply Solution
Apply the Citrus Gel to the stain, making sure the fibres are completely wetted out.
-
Agitate Stain
Agitate the stain to loosen the gum, bitumen or paint.
-
Extract or Blot
Blotting with a white terry towel. Some severe stains might require flushing with the spotting machine.
-
Apply Conquer
Apply Conquer and blot with a terry towel to remove chemical and stain residues.
-
Allow to dry
No rinse is required. Allow to dry for 24-48hours. Maintenance dry vacuuming will remove the dry chemical and stain residues.
Further Notes
-
User Safety
Actichem Conquer, Conquer O2 and Citrus Gel are low-hazard products in use; however, it is always advised to wear gloves when spot cleaning. Avoid contact with eyes. Rinse skin with water if skin contact occurs. Read the safety directions on the labels.
-
Fibre Safety
Actichem Conquer, and Citrus Gel are safe for use on all fibres and fabrics. Avoid using Conquer O2 on delicate cottons and silk. It is advised to pretest when spotting delicate fibres to check for chemical sensitivity and colour fastness.
Large Spills
Large spills of beverages, vomit or urine
Products
Conquer O2
Conquer O2 is a powerful stain remover for carpets and upholstery that also kills germs and eliminates odors. It combines the oxidizing power of oxygen with wetting agents and encapsulating polymers to tackle the toughest stains. Utilizing the latest polymer and surfactant technology, Conquer O2 consistently delivers reliable and dependable results.
NOTE:
The Conquer O2 also has powerful sanitising action against microorganisms found in body fluids
Equipment
To remove large spills from carpet & upholstery, you will need:
• Carpet spotting brush.
• White terry towel.
The Process (Coffee, wine, cola, beverages, food)
-
Apply Solution
Spray apply the Actichem Conquer O2 to the stain, making sure the fibers are completely wetted out. If the spill has penetrated deep into the carpet ensure that sufficient solution is applied to reach it.
-
Agitate Stain
Agitate the stain by tamping up and down with a spotting brush to maximise penetration.
-
Dwell
Allow 10 minutes dwell time.
-
Extraction
Rinse extract the carpet with a spotting machine.
-
Shadow Removal
If there is a shadow left, apply Conquer O2 and absorb or vacuum (no water) extract excess moisture, leaving the treated area slightly damp with Conquer O2. The oxidising and encapsulating action of Conquer O2 will continue to work over the next few hours as it dries completely, removing the remaining stain.
-
Residual Removal
The dry Conquer O2 residues will be brittle enough to be removed the next time the carpet is vacuumed.
Further Notes
-
User Safety
Actichem Conquer O2 is a low hazard product in use, however it is always advised to wear gloves when spot cleaning. Avoid contact with eyes. Rinse skin with water if skin contact occurs. Read the safety directions on the labels.
-
Fibre Safety
Actichem Conquer is safe for use on all synthetic fibres and fabrics and most wool. Avoid using Conquer O2 on delicate cottons and silk. It is advised to pretest when spotting delicate fibres to check for chemical sensitivity and colour fastness.
