April 8th, 2019 | Carpet
What is the best combination for boosting Clean Force?
Clean Force can be boosted with Oxyboost Plus at a rate of 10 grams per litre of solution in the pump- up sprayer. The solution should be hot for the Oxyboost Plus to be properly effective. This solution should be used within about 30 minutes.
POG can also be used at the same dilution rate for very greasy carpets.
Another option which very effective, is the Colloidal Boost. We have had a large amount of real positive feedback on its use as a booster for a wide variety of soil conditions. Colloidal Boost greatly enhances the wetting properties of the Prespray.
Hydrogen Peroxide cannot be used with Clean Force, because the Peroxide is acidic and the Clean Force is alkaline which initiates a very strong reaction which will release all of the oxygen within the first couple of minutes.
NOTE: Always remember that Clean Force must be mixed with warm water to activate the enzymes.
Viscose – a viscous orange-brown solution obtained by treating cellulose with sodium hydroxide and carbon disulphide, used as the basis of [...]
Read moreRemoving mould from natural fabric upholstery can be particularly challenging, as natural fibres like cotton, linen, and wool can act [...]
Read moreRemoving mould from synthetic fabric upholstery is known to be challenging due to the delicate nature of many synthetic fibres [...]
Read moreFake tan stains on carpet are notoriously difficult to remove due to the presence of dihydroxyacetone (DHA), the active ingredient [...]
Read more