How to clean viscose & rayon

January 22nd, 2025 | Carpet

Viscose – a viscous orange-brown solution obtained by treating cellulose with sodium hydroxide and carbon disulphide, used as the basis of manufacturing rayon fiber and transparent cellulose film..

Structure

Viscose is made from reformed or regenerated cellulose (wood pulp and cotton linters) treated with various chemicals, which results in a shiny, silk-looking fiber.

Rayon is technically another version of Viscose, but very similar. The names are often used interchangeably. 

Viscose’s Presentation

  • Often referred to as artificial silk or faux silk
  • “Bamboo” fiber is often actually viscose
  • Often has a shiny appearance

Characteristics of Viscose

The Pros

  • Very soft, excellent hand
  • Excellent insulator – warm in winter, cool in summer
  • Antistatic
  • Easily dyeable – facilitates strong, bold colouring
  • Light – lighter than cotton
  • Very, very absorbent
  • Non-allergenic, hygienic

The Cons

  • Very susceptible to cellulosic browning
  • Dye bleeding and colourloss/fading
  • Fiber shedding–very weak fibers. Will break after 70 bends.
  • Stiffening and wrinkling
  • Weak when wet –loses 50% of it’s strength when wet
  • Dyes are alkaline based –extended acid or strong acid contact can destabilise the dyes
  • Poor shading and poor fiber crushing recovery
  • Very, very absorbent
  • Non-allergenic, hygienic

CLEANING VISCOSE (& RAYON)

Upfront Discussion & Pre-Test

  • The challenges and risks associated with cleaning viscose must be discussed with the client.
  • The weaknesses of viscose itself must be discussed to ensure the client has realistic expectations.
  • Do not make promises of success.
  • Have a standard “viscose/rayon” indemnity form.
  • Pre-test for dye run. If the dye is suspect, you’re better off leaving it.

Pre-Test & Pre-Examine

  • Burn Test –if not 100% sure –odour will be like burning paper. (Silk burn odour is like burning hair)
  • Dye Test – conduct a dye run test
  • Check for dye runs and colour loss (fading) – compare colour density across the back and front of rugs
  • Check for loose and damaged fibers which could release during cleaning

Important Notes

  • Fiber Care – Viscose fibers are brittle and can be loose.
    • Do not use a brush or beater bar vacuum
    • Ensure your is free of sharp edges or hooks which could catch & pull fibers
    • Do not beat or use stiff brush brooms
  • Weak when wet – Viscose loses up to 50% strength when wet
    • Use cleaning tools very gently when wet
    • Do not hang to dry –rugs & fabrics will stretch
  • Structural –avoid stretching and wrinkling
    • Do not hang to dry. Lay flat, face down. (Face down prevents any potential wicking coming to the surface)
    • Fibers matt during the cleaning process. Gently “comb” the viscose when drying to align the fibers.
  • Browning –the fibers of viscose are cellulose based
    • Use only mildly acidic cleaning agents
    • Dry as soon as possible. Speed dry.

Notes On Cleaning

Low Moisture Method – Super Dry

Encap Fine Fabric (dilute 1:4)
Whip up a dense foam. Apply this foam to the viscose using a soft brush or sponge. Agitate and blot dry and align fibers.

Low Moisture Method – Standard

Encap Fine Fabric (dilute 1:16)
Spray apply. Gently agitate the viscose with a soft brush. Dry extract, align fibers and facilitate fast drying.

Drying

A very fine mist of an acid rinse or diluted fabric softener can be used to assist with grooming the viscose when drying.

Notes On Spotting

Minimise the spot remover selection.

Oils, grease, ink, etc – use a volatile dry solvent

  • Actichem VDS

Colour stains & beverages –use 3% Hydrogen Peroxide.

  • Conquer O2 (dilute 1:1 with water)
  • Spotaway U (dilute 1:1 with water)

General Stains

  • Conquer (dilute 1:1 with water)
  • Pet & Flood (dilute 1:10 with water) for urine odour

Related Posts

Read more

How to remove mould from natural fabric upholstery

Removing mould from natural fabric upholstery can be particularly challenging, as natural fibres like cotton, linen, and wool can act [...]

Read more
Read more

How to remove mould from synthetic fabric upholstery

Removing mould from synthetic fabric upholstery is known to be challenging due to the delicate nature of many synthetic fibres [...]

Read more
Read more

How to remove mould from leather

Mould on leather is particularly challenging to remove because leather, as a natural material, can serve as a food source [...]

Read more
Read more

How to remove fake tan from carpet

Fake tan stains on carpet are notoriously difficult to remove due to the presence of dihydroxyacetone (DHA), the active ingredient [...]

Read more

Join us for a free webinar!

In this first part of our two-part series, we’ll dive deep into the world of tiles and natural stone, helping you identify different substrates, understand their characteristics, and determine their compatibility with various cleaning products. This session will equip you with the knowledge to avoid costly mistakes, ensure safe cleaning practices, and manage client expectations professionally. From choosing the right type of chemicals to understanding the vulnerabilities of certain stones, you’ll gain the confidence to deliver results without the guesswork. Register and attend to receive a 250ml sample of T&G Cleaner LF and a System 7 Pad Sample to enhance your cleaning toolkit!

Date: Tuesday 18th February

Time: 9:00am

 - 9:30am AEDT

Sign up for the webinar

Fill in your details to sign up for our webinar and maybe to subscribe to our newsletter.

Restoration Handbook Download

Fill in your details to receive a download link for the Restoration Handbook

Stone Handbook Download

Fill in your details to receive a download link for the Stone Handbook

Actichem Catalogue Download

Fill in your details to receive a download link for the catalogue. 

By using this website, you acknowledge that you have read and understand the Privacy Policy. It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.