How To Remove Wax From Carpet

December 18th, 2024 | Carpet

All How To How To Remove Wax From Carpet

Removing wax from carpet can be particularly challenging due to its unique properties.

Candle wax is typically made from materials like paraffin, beeswax, or soy wax, each of which can solidify upon cooling, forming a tough layer that adheres strongly to fibres. This solidification makes it difficult to simply lift away, while the dyes or pigments in the wax can stain fabrics, penetrating deeply when melted.

Additionally, wax is heat-sensitive; while it must be melted for effective removal, excessive heat can damage the fibres or cause the wax to seep further into the material. Traditional cleaning agents often struggle with wax due to its hydrophobic nature, which repels water, and different fabric compositions can further complicate the cleaning process.

Products: Removing wax from Carpet

Gum Gone

Gum Gone is the perfect solution for removing wax from carpet and upholstery, due to its powerful blend of solvents designed to break down wax quickly and effectively. Its fast-acting formula easily lifts stubborn wax residues without damaging the fabric, making it an essential tool for professional cleaners seeking to restore carpets and upholstery to their original condition.

Equipment

To remove wax from carpet & upholstery, you will need:

Absorbent white terry towel
Clothes iron
Conquer
Carpet Extraction Machine.

Ensure that you have read and understood the safety data sheet and technical information for all chemical products used. This includes a thorough understanding of directions for use and the limitations and capabilities of each product.

The Process

Before

1. Apply Conquer O2

2. Agitate

3. Dwell for 10 mins

4. Extract

After

Remove excess wax
Begin by laying a dry, white absorbent towel over the candle wax. Gently press a clothes iron on top, using a low setting. This process will melt the wax, allowing it to be absorbed into the cloth. Be sure to exercise caution during this step—avoid overheating the iron to prevent burning or distorting the fibers, particularly with synthetic materials.
Repeat Step 1 to remove all excess
Continue this procedure, replacing the towel as needed, until you no longer see any wax transferring onto the cloth. This may take a few repetitions, but patience will ensure that you remove as much wax as possible.
Apply Gum Gone
Next, take a new, dry white absorbent cloth and moisten it with Gum Gone. Carefully blot the affected area, allowing the solvent to penetrate and break down any remaining wax residues. This step is crucial for a thorough cleaning.
Blot & remove residues
Gently blot to lift the wax residues from the carpet or fabric. It’s important to avoid adding any water at this stage, as introducing moisture can hinder the removal process and make the wax more difficult to extract.
Rinse & extract
Finally, rinse and extract the area by prespraying it with Conquer or a suitable prespray solution. Follow up by using wet extraction equipment to remove any lingering residues. This last step will help restore the carpet or upholstery to its original condition, ensuring a thorough and effective cleaning.

Tips

Alternative Product
If Gum Gone is unavailable, you can substitute it with Orange Solvent a citrus blend for gum and oily stain removal.
Preventing Fibre Distortion
Always set your iron to a low heat when removing wax from carpet or upholstery. This will help prevent burning or distorting the fibers, especially in synthetic materials. Keeping the heat low allows you to effectively melt the wax while preserving the integrity of your fabrics, ensuring a safe and successful cleaning process.
Encapsulation Method
If you’re using an encapsulation method or a low moisture cleaning procedure, it’s essential to blot the area thoroughly with Conquer. This step helps to effectively lift any spotting residues that may remain after the initial cleaning.
By ensuring that the surface is well-treated with Conquer,
you not only enhance the overall cleaning efficacy but also promote the longevity and appearance of the fibers. Properly addressing these residues will contribute to a cleaner, fresher
finish, leaving your carpets or upholstery looking revitalised.

Where To Buy

GUM GONE – Find a stockist

Gum Gone is a powerful aromatic solvent for oily spots.

Gum Gone is a super strength blend for removing gum, grease, tough oily soils and paints. It is formulated to work fast, even on tough gums and stubborn grease that other solvents can’t manage. A very valuable tool in the professional cleaner’s arsenal.

Additional Resources

Download Blog

Carpet Handbook

Actichem Brochure

Share this product

Email Facebook Linkedin twitter

Manufacturing & Head Office
11 Gamma Close
Beresfield NSW 2322
Newcastle, Australia

(02) 4966 5516
[email protected]

Subscribe to updates

All

Commercial Cleaning

Stone & Tile Care

Connect

Certifications

This website requires Javascript. Please enable javascript in your browser.