• Contact Us

  • Newsletter

  • 1800 108 800 Contact Us

    Emulsifier Plus AP455

    How to Use

    Dilutions:      

    Portable Extractors

    • Mix 12ml / 10Lt (1:800) when cleaning wool and stain resistant carpets or where the two step process is used.
    • Mix 25ml / 10Lt (1:400) for heavy soil conditions using the single step process.

    Truck Mounts

    • Mix 250ml per 10Lt warm water to make the truck mount concentrate.
    • Set the flow meter at 2 to 4 gallons per hour for cleaning wool and stain resistant carpets or where the two step process is used (prespray followed by rinse extract).
    • Set the flow meter at 4 to 8 gallons per hour for heavy soil conditions using the single step process.

    Application:

    Single Step Cleaning Method (for light to medium soiling)

    1. Prepare the carpet by thoroughly vacuuming the area to be cleaned.
    2. Using the dilution rates specified above clean/extract the carpet using slightly overlapping strokes.
    3. Realign the carpet fibres and assist the drying process.

    Two Step cleaning Method (for medium to heavy soiling)

    1. Prepare the carpet by thoroughly vacuuming the area to be cleaned and applying the relevant prespray treatment, providing the suggested dwell time and agitation.
    2. Using the dilution rates specified above, rinse extract the carpet using slightly overlapping strokes.
    3. Realign the carpet fibres and assist the drying process.

    Tips:

    • Move the wand slower over areas which are more heavily soiled.
    • Use a dry stroke to dry the carpet faster.