• Contact Us

    Please leave this field empty.

  • 1800 108 800 Contact Us

    AP166 T&G Degreaser

    How to Use

    T&G Degreaser is corrosive and appropriate care should be exercised including the use of suitable protective gloves, goggles and protective clothing and warning signage.

    Read and understand the MSDS before use

    Always pre-test in an inconspicuous location for sensitivity to chemicals

    Directions: The dilution rate depends on the nature and degree of soiling and the mode of use.

    • Deep clean applications Mix 1 part T&G Degreaser with 10 to 20 parts water (166 to 50ml/Litre). (Industrial clean-ups, stripping ovens etc)
    • Standard cleaning applications Mix 1 part T&G Degreaser with 50 parts water (20ml/Litre). (Kitchens, workshops, walkways, etc.)
    • Maintenance Mix 1 part T&G Degreaser with 100 parts water (all water cleanable hard surfaces.)
    • High Pressure Cleaners Mix 1 part T&G degreaser with 20 parts water into the solution tank. Meter according to soil conditions.
      • Follow standard cleaning techniques, apply solution with sprayer, mop or through equipment chemical feed system.
      • Agitate and allow 5-10 minutes dwell time.
      • Rinse / extract with clear water.


    • Classified as hazardous according to the criteria of Worksafe Australia.
    • Classified as Class 8, according to the Australian Dangerous Goods code for transport.
    • Observe all safety recommendations made on the MSDS and product label.