• Contact Us

  • Newsletter

  • 1800 108 800 Contact Us

    Tile & Grout Power AP163

    How to Use

    Tile & Grout Power is corrosive and appropriate care should be exercised including the use of suitable protective gloves, goggles and protective clothing and warning signage.

    Read and understand the MSDS before use

    Always pre-test in an inconspicuous location for sensitivity to chemicals.


    1. Deep clean applications Mix 1 part Tile & Grout Power with 10 to 20 parts water (100 to 50ml/Litre).
      Standard cleaning applications Mix 1 part Tile & Grout Power with 80 to 120 parts water (12 to 8ml/Litre).
    2. Apply solution with a mop and bucket, auto-scrubber or pressure washer.
    3. Agitate heavily soiled areas using a stiff brush, autoscrubber or slow speed rotary scrubber.
    4. Allow 10 minutes dwell time and re-agitate
    5. Rinse thoroughly with clean water.