• Contact Us

  • Newsletter

  • 1800 108 800 Contact Us

    Tile & Grout Restore AP160

    How to Use

    Always pre-test the cleaning solution on the surface to be cleaned to check for any substrate instability or incompatibility with T & Grout Restore. Observe all safety directions and read and understand the MSDS before use.

    Usage: (Mineral scale build-up, efflorescence, cement residues and heavy duty applications)

    1. Mix 1 part Tile & Grout Restore with 10 to 30 parts water (100-30ml/Litre). Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry.
    2. Scrub thoroughly with applicable nylon scouring/floor pad or brush.
    3. Allow 10 to 30 minutes dwell time and re-agitate.
    4. Extract/Pick up resultant slurry with extraction equipment.
    5. Neutralize remaining residues by rinsing thoroughly with a 1:300 solution (30ml/10Lt) of Tile & Grout Cleaner Pro or Proneutro

    Usage: (Grout residues and light duty applications)

    1. Mix 1 part Tile & Grout Restore with 80 to100 parts water (10-12ml/Litre) Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow the solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
    2. Scrub thoroughly with applicable nylon scouring/floor pad or brush
    3. Allow 10 to 30 minutes reaction time and re-agitate.
    4. Rinse well with clean water.

    Safety

    • Not classified as dangerous according to the Australian Dangerous Goods code.
    • Classified as irritant according to the criteria of Worksafe Australia.
    • Observe all safety recommendations made on the product label and MSDS