• Contact Us

  • Newsletter

  • 1800 108 800 Contact Us

    Intense Pro AP907

    How to Use


    • New installations must be fully cured before application of Intense Pro (Min 48 hours)
    • Existing stone, tile and grout must be totally clean, dry and chemical free.
    • Coverage is 10 to 30m2 / Litre per coat. The coverage for the 2nd and 3rd coats is dramatically greater.


    1. Apply 1 to 2 coats of Intense Pro by generously saturating the surface using a polish applicator, roller or sprayer.
    2. Using a squeegee or/and absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of each application. Do not allow the surface to dry during this time.
    3. Allow 20 minutes in between coats. Apply the subsequent coat whilst the previous coat is still wet. (Wet-on-wet application)
    4. Keep traffic off for 2 hours. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.


    • Flammable according to the Australian Dangerous Goods Code.
    • Hazardous according to the criteria of NOHSC.
    • Read and understand the Material Safety Data Sheet before using.